KLINGER BABSY MODULES
All modules, sheets and further information at a glance.
DIN EN13445-3 Unfired pressure vessels
| BBSYEN01 | EN13445-3, Cylinder and spherical shells, subject to internal pressure |
| BBSYEN02 | EN13445-3, Dished heads, subject to internal pressure |
| BBSYEN03 | EN13445-3, EN13445-3, Conical shells, subject to internal pressure |
| BBSYEN04 | EN13445-3, Shells subject to external pressure |
| BBSYEN05 | EN13445-3, Openings in cylinder- and spherical shells |
| BBSYEN06 | EN13445-3, EN13445-3, Flat heads and covers |
| BBSYEN07 | EN13445-3, Flanged connections |
| BBSYEN08 | EN13445-3, Spherically domed and bolted ends |
| BBSYEN09 | EN13445-3, Tube sheets |
| BBSYEN10 | EN13445-3, Compensators |
| BBSYEN11 | EN13445-3, Rectangular pressure vessels |
| BBSYEN12 | EN13445-3, External nozzle loads in cylinder and spherical shells |
| BBSYEN13 | EN13445-3, Lifting lugs |
| BBSYEN14 | EN13445-3, Vessels supported by saddles |
| BBSYEN15 | EN13445-3, Vessels supported by lugs |
| BBSYEN16 | EN13445-3, Vessels with feet at dished head |
| BBSYEN17 | EN13445-3, Vessel with skirt supports |
| BBSYEN18 | EN13445-3, Vessels supported by rings |
| BBSYEN20 | EN13445-3, Complex dynamic load analysis |
| BBSYEN21 | EN13445-3, Derivation of the test pressure |
| BBSYEN_G | EN13445-3, Optimized flanged connections acc. App. G (equal to EN1591) |
DIN EN13480-3 Design of Metallic Piping
| BBSYE48001 | EN13480-3, Cylinder shells, chapter 6.1 |
| BBSYE48002 | EN13480-3, Elbows, chapter 6.2 and annex B |
| BBSYE48003 | EN13480-3, Mitred bends subject to internal pressure, chapter 6.3 |
| BBSYE48004 | EN13480-3, Conical shells, subject to internal pressure, chapter 6.4 |
| BBSYE48005 | EN13480-3, Flanged connections, chapter 6.6 |
| BBSYE48006 | EN13480-3, Dished heads, subject to internal pressure, chapter 7.1 *) |
| BBSYE48007 | EN13480-3, Flat heads and covers, chapter 7.2 *) |
| BBSYE48008 | EN13480-3, Openings in cylinder- and spherical shells, chapter 8 |
| BBSYE48009 | EN13480-3, Shells subject to external pressure, chapter 9 |
| BBSYE48010 | EN13480-3, Rectangular lugs, chapter 11 *) |
| BBSYE48011 | EN13480-3, Y-Fittings, chapter 8 |
| BBSYE48012 | EN13480-3, Dynamic load analysis, chapter 10 |
| BBSYE48013 | EN13480-3, Compensators, annex C *) |
| BBSYE480014 | EN13480-3, Derivation of the test pressure |
Module AD-2000 Merkblätter
| BBSYB1 | AD Sheet B1: Cylinder and spherical shells, int. pressure |
| BBSYB2 | AD Sheet B2: Conical shells, internal/external pressure |
| BBSYB3 | AD Sheet B3: Dished heads internal/external pressure |
| BBSYB4 | AD Sheet B4: Spherically domed and bolted ends |
| BBSYB5A | AD SheetB5: Part 1: Flat heads and covers |
| BBSYB5B | AD Sheet B5: Part 2: Tube sheets |
| BBSYB6 | AD Sheet B6: Cylinder shells subj. to external pressure |
| BBSYB7 | AD Sheet B7: Bolts |
| BBSYB8 | AD Sheet B8: Flanges |
| BBSYB9 | AD Sheet B9: Openings in cylinder- and spherical shells |
| BBSYB10 | AD Sheet B10: Thick walled pipes |
| BBSYB13 | AD Sheet B13: Compensators |
| BBSYB11 | AD-B1, addendum 1 Elbows |
| BBSYB51 | AD-B5, addendum 1: Pipes with rectangular cross-section |
| BBSYB01 | AD Sheet S1: Limits of static and dynamic loads |
| BBSYB02 | AD Sheet S2: Dynamic loads analysis2 |
| BBSYB31 | AD Sheet S3/1: Skirts |
| BBSYB32 | AD Sheet S3/2: Vessels on saddles |
| BBSYB33 | AD Sheet S3/3: Vessels with feet at dished head |
| BBSYB34 | AD Sheet S3/4: Lugs |
| BBSYB35 | AD Sheet S3/5: Vessels at support rings |
| BBSYB36 | AD SheetS3/6: External loads on nozzles using WRC107 and WRC297 |
| BBSYHP30 | AD SheetHP30: Derivation of the test pressure |
If you are interested in further fact sheets or information – you will find them here:
British Standard BS5500
| BBSYBS1 | PD5500: Cylinder and spherical shells subject to internal pressure |
| BBSYBS2 | PD5500: Cones subject to internal pressure |
| BBSYBS3 | PD5500: Dished heads subject to internal pressure |
| BBSYBS4 | PD5500: Spherically domed and bolted ends |
| BBSYBS5 | PD5500: Flat heads |
| BBSYBS6 | PD5500: Tube sheets |
| BBSYBS7 | PD5500: Cylinder, spheres and cones subject to external pressure |
| BBSYBS8 | PD5500: Bolted flange connections |
| BBSYBS9 | PD5500: Openings (according appendix F) |
| BBSYBSG2 | PD5500: Integral attachments, lugs and nozzles with external loads |
| BBSYBSG3 | PD5500: Vessels on saddles |
ASME Code Section VIII/1
| BBSYAS2 | UG-32: Conical shells subject to internal pressure |
| BBSYAS3 | UG-32: Dished heads subject to internal pressure |
| BBSYAS5 | UG-34: Flat heads and covers, UG39 openings in flat heads |
| BBSYAS7 | Cylinders, spheres and cones subject to external pressure |
| BBSYAS8 | App. 2: Bolted circular flange connections |
| BBSYAS9 | UG-37ff: Openings |
| BBSYUHX | Tube sheets |
| BBSYAS99 | UG-99, UG-100: Derivation of the hydraulic and pneumatic test pressure |
ASME Code Section VIII/2
| BBSYAS22 | Conical shells subject to internal pressure, chapters 4.3.4, 4.3.11-4.3.13 |
| BBSYAS23 | Dished heads subject to internal pressure, chapters 4.3.6, 4.3.7 |
| BBSYAS25 | Flat heads and covers and openings, chapters 4.6, 4.5.12 |
| BBSYAS28 | Bolted circular flange connections, chapter 4.16 |
| BBSYAS29 | Openings, chapter 4.5 |
| ASWPACK | Package ferrous ASME-Material |
ASME Piping
| BBSYAN41 | Pipes acc. ASME/ANSI B31.4 (Liquid petroleum) |
| BBSYAN49 | Openings acc. ASME/ANSI B31.4 (Liquid petroleum)) |
| BBSYAN81 | Pipes acc. ASME/ANSI B31.8 (Gas transmission) |
| BBSYAN89 | Openings acc. ASME/ANSI B31.8 (Gas transmission)) |
| BBSAAN37 | Pipes subject to external pressure ASME/ANSI B31.3 chapter 304.1.3 |
| BBSYWLET | Weldolets |
Welding research council bulletin WRC
Stress calculation of integral parts (circular, rectangular lugs and nozzles) at cylindrical and spherical shells, using WRC107
| WRC107KT | Superposition acc. Kerntechnische Regeln (Germ. nuclear) |
| WRC107S3 | Superposition acc. AD-Rules |
| WRC107BS | Superposition acc. BS5500 |
| WRC107AS | Superposition acc. ASME III, Subsections NB3200/NB3600 |
Stress calculation of integral parts (circular, rectangular lugs and nozzles) at cylindrical shells, using WRC297
| WRC297KT | Superposition acc. Kerntechnische Regeln (Germ. nuclear) |
| WRC297S3 | Superposition acc. AD-Rules |
| WRC297AS | Superposition acc. ASME III, Subsections NB3200/NB3600 |
| BBSYS36 | WRC107+297 with stress superposition according to AD-S3/6 |
DIN EN12952-3 Water Boilers and Plant Components
| BBSYEN1201 | EN12952-3 Ch. 7.11, Cylinder and spherical shells, subject to internal pressure |
| BBSYEN1202 | EN12952-3 Annex A, Elbows |
| BBSYEN1203 | EN12952-3 Chapter 10, Dished heads, subject to internal pressure |
| BBSYEN1206 | EN12952-3 Chapter 8/10 Openings in cylinder- and spherical shells |
| BBSYEN1207 | EN12952-3 Chapter 8/4 Bolts |
| BBSYEN1230 | EN12952-3 Derivation of the test pressure |
DIN EN12516 Valve Housings
| BBSYENA-09 | EN13480-3, Flanged connections |
| BBSYENA_10 | EN12952-3 Chapter 10, self-sealing covers |
Stoomwezen (Netherlands)
| BBSYST1 | D0201: Cyl./Spheres/Cones subject to internal pressure |
| BBSYST2 | D0203: Dished heads, knuckled cones subject to internal pressure/td> |
| BBSYST3 | D0205: Spherically domed and bolted ends |
| BBSYST4 | D0206: Rectangular pipes subject to internal pressure |
| BBSYST5 | D0210: Toroidal bends subject to internal pressure |
| BBSYST16 | D0211: Mitred bends subject to internal pressure |
| BBSYST6 | D0301: Cyl./Spheres/Cones subject to external pressure |
| BBSYST7 | D0303: Dished heads subject to external pressure |
| BBSYST8 | D0401-402: Flat heads |
| BBSYST9 | D0403-405: Tube sheets |
| BBSYST10 | D0501-502: Openings in shells |
| BBSYST11 | D0503: Openings in flat heads |
| BBSYST12 | D0701/0801: Flanged connections |
| BBSYST13 | D0601: Stiffeners |
Material Databases, German DIN and EN Standards
| BMATB1 | Plates according DIN, AD, VDTÜV, EN |
| BMATR1 | Seamless pipes according DIN, AD, VDTÜV, EN |
| BMATR3 | Welded pipes according DIN, AD, VDTÜV, EN |
| BMATS1 | Bolts according to DIN17240, DIN267 |
| BMATS0 | Forgings according AD and VDTuev |
| BMATS2 | Forgings according DIN 17243 |
| BMATB2 | Nonferrous plates according AD-W and DIN1745 |
| BMATR2 | Nonferrous pipes according AD-W and DIN1746 |
| BMATB3 | Plates according EN10028-7, cold formed |
| BMATG1 | Cast material acc. EN10213, EN1563, VDTüV, SEW410 |
| BMATG2 | Aluminium cast material VAR, DIN EN1706 |
Material Databases, International
| BMATBSB1 | Plates according British Standard |
| BMATBSR1 | Seamless pipes according British Standard |
| BMATASB1 | Plates according Part D, ASME VIII/1 |
| BMATASR1 | Seamless pipes according Part D, ASME VIII/1 |
| BMATASR2 | Welded pipes according Part D, ASME VIII/1 |
| BMATASS1 | Forgings according Part D, ASME VIII/1 |
| BMATASS0 | Bolts according Part D, ASME VIII/1 |
| BMATASG0 | Casting according Part D, ASME VIII/1 |
| BMATANB1 | Plate & sheet material according ANSI B31.1 |
| BMATANR3 | Seamless pipes according ANSI B31.1 |
| BMATANR1 | Seamless pipes according ANSI B31.3/4 |
| BMATANR4 | Welded pipes according ANSI B31.1 |
| BMATANR2 | Welded pipes according ANSI B31.3/4 |
| BMATANS0 | Forgings according ANSI B31.1 |
| BMATANS1 | Forgings according ANSI B31.1 |
| BMATSAB1 | Plates according Stoomwezen/ASME M0201, M0202 |
| BMATSAR1 | Seamless pipes according Stoomwezen/ASME M0301, M0302 |
| BMATSAR2 | GWelded pipes according Stoomwezen/ASME M0301, M0302 |
| BMATSAS0 | SForgings according Stoomwezen/ASME M0601, M0602 |
| BMATSAS1 | Bolts according Stoomwezen/ASME M0602, M0701, M0702, M0802 |
| BMATBAB1 | Plates according BS5500/ASME / BS5500 enquiry case 91 |
| BMATBAR1 | Seamless pipes according BS5500/ASME / BS5500 enquiry case 91 |
| BMATBAR2 | Welded pipes according BS5500/ASME / BS5500 enquiry case 91 |
| BMATBAS0 | Forgings according BS5500/ASME / BS5500 enquiry case 91 |
| BMATA2B1 | Plates according Part D, ASME VIII/2 |
| BMATA2R1 | Seamless pipes according Part D, ASME VIII/2 |
| BMATA2R2 | Welded pipes according Part D, ASME VIII/2 |
| BMATA2S1 | Forgings according Part D, ASME VIII/2 |
| BMATA2S0 | Bolts according Part D, ASME VIII/2 |
| BMATA2G0 | Casting according Part D, ASME VIII/2 |
